Installing the SendPro Mailstation

If you are installing a SendPro Mailstation for the first time, follow these instructions.

1. Before you begin
2. Open the box
3. Unpack the device
4. Connect the device to the power outlet
5. Select network connection type
6. Set up your PB.com account
7. Install the ink cartridge and run a test pattern
8. Install the scale
9. Enter a security PIN (optional)
10. Add postage

Before you begin

Before you begin installing your new SendPro Mailstation, you must decide what type of connection (wired or wireless) you wish to use. In addition, you must gather account and password information.

Choose your postage payment method

Pitney Bowes offers different options to pay for postage for mailing. Decide how you wish to fund postage on your SendPro Mailstation. Visit Paying for postage for more information.

Choose how to connect to the internet

Wired Connections	Take about 10 minutes to set up Require access to a network port and power outlet.
Wireless Connections	Take about 15 minutes to set up Require access to a wireless network (router) and power outlet. Require a wireless network name and password

Get account and password information

• Find the email address and password that you use to sign into Your Account on Pitney Bowes.
• During the installation, you can create a new email address and account instead of using an existing one.

Open the box

This diagram lists the items you should find in your box. If anything is missing, contact Pitney Bowes.

Unpack the device

1. Remove all tape.
   
2. Open and remove the orange protector.
   
3. Close the cover.
   

Connect the device to the power outlet

1. Connect the device to a wall power outlet.
   
2. Press the power button, and wait for the system to start up.
   
3. Tap Get Started on the touchscreen and continue installation steps.

Select network connection type

1. Tap the network type, either Wired or Wireless.
   1. If you tap Wireless:
      1. Tap the name of your router and the password.
      2. Enter your password.
      3. Tap Connect.
   2. If you tap Wired:
      1. Plug in the Ethernet cable on the back of the device.
      2. Tap Advanced Network Options.
      3. Tap Connect.
2.  Tap Continue when you see a "Connected to Network" message.

Set up your PB.com account

1. Tap Enter email address.
   1. Enter the email you use to log in to Your Account.
   2. If you don't have Your Account set up, enter your email address to create an account.
2. Tap Next.
3. Follow the prompts to enter your password.
4. Tap Confirm to confirm your email and password.

Once the device connects to Pitney Bowes, you are ready to install the ink cartridge and the scale.

Install the ink cartridge and run a test pattern

1. Remove the ink cartridge from its container. Remove the orange sticker from the bottom of the ink cartridge.
   
2. Open the ink door.
   
3. Slide the cartridge in at an upward angle, then firmly press it up until it clicks into place.
   
4. After you click the ink cartridge into place, close the ink door.
   
5. Tap Continue.
6. When the screen says Create a Test Print, insert an envelope or tape sheet into the slot, pushing in all the way to the back and right. The device clamps the letter and prints postage. The power button flashes while the device prints.
   
7. When the test print envelope is released by the device, compare the printed test pattern to the ones on the screen.
8. Tap Good Test Print if the test pattern looks good.
   
9. Tap Continue.

Install the scale

1. Open the door on the right side of the device to access the USB port.
   
2. Connect the USB cable to the device.
   
3. Position the scale
   • Option 1: Install the scale behind the device
     1. Slide the scale stand under the left back side of the device. 
        
     2. Make sure the scale stand slides along to the left side of the bottom of the device.
        
     3. Slide the scale into the pegs on the scale stand.
        
   • Option 2: Install the scale on either side of the device
     1. Respond to the prompts on the display to complete the scale installation.
        

Enter a security PIN

If you wish to create a PIN for your device, enter a 4-digit number when prompted.

Add postage

1. Tap Continue.
2. Enter an amount.
3. Tap Add Postage.

Your SendPro Mailstation is ready for use.