Skip to main content
Related Search Topics: Errors & Troubleshooting
Print this support article

Error code: 03114100DB, how to resolve on the Connect+ 500W, Connect+ 1000, and more

Learn how resolving error 03114100DB on the Connect+ 500W, Connect+ 1000, Connect+ 2000, Connect+ 3000.
Products affected: Connect + 500W®, Connect + 1000®, Connect+ 2000®, Connect+ 3000®

Issue

The meter displays error code 0311-41-00DB and the meter may not run mail.

Cause

There was an error calibrating the length sensor.

Resolution

You may be able to clear the error by simply restarting your meter. Here are the steps to follow for a safe restart:
  1. Select the green house at the top of the screen to go to the home screen
  2. Select Shut Down from the lower right corner
  3. Select Shut Down from the menu
  4. Select Shut Down on the pop up
  5. Wait for the screen to go black and the blue light on the front to go out. This may take several minutes.
  6. After everything has been off for 10 seconds press the power button to power the Connect+ back up
Note: You should perform a shut down nightly using the shut down icon, not the power button at the front of the equipment.

If your issue is not resolved, contact customer support from 8 am to 8 pm Eastern Time. Have your model number ready.

UPDATED: 14 August 2021