Adjusting the horizontal alignment on the AddressRight 200

Horizontal alignment adjusts offset of individual printheads (side-to-side) offset to fine tune horizontal positioning of the printout.

To adjust the horizontal alignment:

1. Tap Printer Setup on the Main Menu, or press the Quick Menu button on the Control Panel.
2. Tap Horizontal Alignment.
   
3. Select the desired printhead.
4. Tap the directional arrows to move the bar in the desired direction. You can align individual printheads up to ±100.0 microns in 5.0 micron increments.
5. Tap Reset to reset the horizontal alignment to 00.0 (default).
6. Tap Test Print to print a test page using the current adjustments and print parameters to check printing quality and printhead alignment.