Skip to main content
Related Search Topics: Printing
Print this support article

Printing a test pattern on the Connect+ series and SendPro P

Learn how to print a test pattern on the Connect+ 500W, Connect+ 1000, Connect+ 2000, Connect+ 3000, SendPro P1000, SendPro P1500, SendPro P2000 and SendPro P3000.
Products affected: Connect+® 500W, Connect+® 1000, Connect+® 2000, Connect+® 3000, SendPro® P1000, SendPro® P1500, SendPro® P2000, SendPro® P3000
You can print a test pattern to check the print quality of the postage indicia without spending any of your postage funds. If the sample has broken or missing lines, you may need to replace the ink cartridge or print head.
  1. From the home screen, select Settings under Mailing.
  2. Select Hardware.
  3. Select Printer.
  4. Select Print Test Pattern or Print Color Test Pattern.
  5. Select Start or Tape.
    • If the pattern is broken or missing lines, select Not OK - Clean print head. 
    • If the pattern is not broken or missing lines, select Image is OK - Done.
  6. Select the Home button to return to the Home screen.
If you need ink, order a genuine Pitney Bowes replacement ink cartridge:

Order Ink

Related topics

UPDATED: May 17, 2024