Turning the Smart Access Management tablet on or off

To turn the Smart Access Management tablet on or off, follow these instructions.

1. Turning the Smart Access Management Floor standing tablet on or off
2. Turning the Smart Access Management Countertop tablet on or off
3. Turning the Smart Access Management Desktop tablet on or off

Smart Access Management Floor standing tablet

1. Unlock the tablet cover on both sides using the small circular key.
2. Slide the tablet cover up to remove it.
   
3. Press the tablet power button to turn on the tablet. Wait for the tablet to start up.
   
   1. Power button.
   2. Camera orientation.
   3. USB port.
4. Replace the tablet cover by lining up the notches and sliding back down into place.
5. Lock the tablet cover by pushing the tablet locks back in.

Smart Access Management Countertop tablet

1. Unlock the tablet cover on both sides using the small circular key.
2. Slide the tablet cover up to remove it.
   
3. Press the tablet power button to turn on the tablet. Wait for the tablet to start up.
   
   1. Power button.
   2. Camera orientation.
   3. USB port.
4. Replace the tablet cover by lining up the notches and sliding back down into place.
5. Lock the tablet cover by pushing the tablet locks back in.

Smart Access Management Desktop tablet

To turn the Smart Access Management tablet on or off, follow these instructions.

1. Unlock the tablet lock on the back, using the small circular key.
2. Slide the tablet cover upwards and pull forwards to remove it.
   
3. Press and hold the tablet power button to turn on the tablet. Wait for the tablet to start up.
   
   1. Tablet power button.
4. Replace the tablet cover into its base and slide downwards to secure it.
5. Lock the tablet.
6. Fit the USB power lead into the supplied plug and connect to mains power.

Related topics

• Installing the Smart Access Management Desktop