Configuring a Static IP Address on the DM110i, DM160i and DM220i

Use these instructions if your franking machine needs a Static IP Address to connect to the Pitney Bowes Data Centre.

1. Press Options.
2. Press Page Down twice.
3. Select Connect - Data Centre.
4. Select LAN Settings.
5. Select Get IP.
6. Select Manually.
7. Select IP Address/IP Addr. Enter your static IP address. Enter the complete IP address, including the decimal points separating the IP address parts. If one or more sections contain less than 3 digits, use zeros to fill. For example 192.168.1.25 should be entered as 192.168.001.025.
8. Press Enter or Accept to confirm.
9. Select Subnet Mask/Subnet. Enter your subnet mask settings in the same way as the IP address.
10. Press Enter or Accept to confirm.
11. Select Default Gateway/Gateway. Enter your default gateway in the same way as the IP address.
12. Press Enter or Accept to confirm.
13. If requested, press Enter again to confirm.
14. Press Home to return to the Home screen.