Location Alert

You are currently viewing our website for United Kingdom.

Would you like to switch to the United States website?

Skip to main content
Related Search Topics: Maintenance
Print this support article

Sealing envelopes without printing postage on the SendPro C, SendPro+

Use Seal Only mode to seal envelopes without printing anything.
Products affected: SendPro® C, SendPro®+ (2H20, R2H20, R2H20M, R1H20C, 1H20C, R1H20CM, 7H20C, R7H20C, R7H20CM)

Use Seal Only mode to seal envelopes without printing anything.

  1. Tap Envelope Printing on the Home screen.
  2. Tap Print Mode. You may need to swipe up on the screen to see this option.
  3. Select Seal Only.
  4. Tap Apply.
  5. Place your envelope face up, flap down into the feeder. Be sure to slide the envelope flap under the edge of the feed deck.
    Envelope flap fed underneath the feed deck
  6. Insert the envelope into the device. The device seals the envelope.
    Envelope feeding through the device

Related topics

UPDATED: 03 January 2025