Adjusting the vertical alignment on the AddressRight 100

Vertical alignment disables the top nozzles in individual printheads to remove any overlap to fine tune vertical positioning of the printout.

To adjust the vertical alignment:

1. Tap Printer Setup on the Main Menu, or press the Quick Menu button on the Control Panel.
2. Tap Vertical Alignment.
   
3. Select the desired printhead.
4. Tap the directional arrows to move the bar in the desired direction. You can adjust the individual printheads up to ±1.0 microns in 0.1 micron increments.
5. Tap Reset to reset the vertical alignment to 0.0 (default).
6. Tap Test Print to print a test page using the current adjustments and print parameters to check printing quality and printhead alignment.