Location Alert

You are currently viewing our website for Australia.

Would you like to switch to the United States website?

Skip to main content
Related Search Topics: Installation, Setting Up & Drivers
Print this support article

Turning the Smart Access Management tablet on or off

To turn the Smart Access Management tablet on or off, follow these instructions.
Products affected: Smart Access Management®

To turn the Smart Access Management tablet on or off, follow these instructions.

  1. Turning the Smart Access Management Floor standing tablet on or off
  2. Turning the Smart Access Management Countertop tablet on or off
  3. Turning the Smart Access Management Desktop tablet on or off

Smart Access Management Floor standing tablet

  1. Unlock the tablet cover on both sides using the small circular key.
  2. Slide the tablet cover up to remove it.
    Floor standing device
  3. Press the tablet power button to turn on the tablet. Wait for the tablet to start up.
    Tablet orientation
    1. Power button.
    2. Camera orientation.
    3. USB port.
  4. Replace the tablet cover by lining up the notches and sliding back down into place.
  5. Lock the tablet cover by pushing the tablet locks back in.

Smart Access Management Countertop tablet

  1. Unlock the tablet cover on both sides using the small circular key.
  2. Slide the tablet cover up to remove it.
    Countertop tablet
  3. Press the tablet power button to turn on the tablet. Wait for the tablet to start up.
    Tablet orientation
    1. Power button.
    2. Camera orientation.
    3. USB port.
  4. Replace the tablet cover by lining up the notches and sliding back down into place.
  5. Lock the tablet cover by pushing the tablet locks back in.

Smart Access Management Desktop tablet

To turn the Smart Access Management tablet on or off, follow these instructions.

  1. Unlock the tablet cover on the rear by using the circular key.
  2. Prise the cover open from the left hand side to remove it.
    Unhinge the tablet cover
  3. Press the tablet power button to turn on the tablet. Wait for the tablet to start up.
    Tablet cover removed
    1. Tablet power button.
  4. Slot the tablet cover in the right hand side and snap back into place.
  5. Lock the tablet.

Related topics

UPDATED: 18 August 2023

Contact Us
Email
Report an issue from your inbox.
13 23 63
Mon – Fri, 8am - 5pm (Ex. Public Holiday)